Flexible Ale Extractor - 18-22 Gallon (Double Out)

Flexible Ale Extractor - 18-22 Gallon (Kilderkin) 3/4 BSP Double Out

• For 18-22 gallon casks
• Double outlet
• Allows upright dispense
• Low maintenance
• Float stays submerged
• Save approximately 2 pints per barrel
• Hop Filter included
• Handy ‘Ale Extractor Indicator’ line
• 3/4 BSP
• One collar (additional collar optional)

A Flexible Ale Extractor is an easy way of extracting your ale from the cask. This ale extractor has a silicon tube and a flotation device. With the inlet inserted into the barrel, the float sits at the desired angle just below the top. This means the beer is always drawn from the surface helping to give you a clear pint every time.

Our Flexible Ale Extractor comes with a single body (also known as a collar or broach). An optional spare body is available (see check box above) which allows you to tap the next barrel in advance. When the previous barrel has been emptied, open up the next body (which has been pre-tapped into the next cask) and lower through the extractor or siphon through. This removes a considerable amount of waiting time for the beer to be primed.

Our Extractors are simple to use, require low maintenance, eliminate the need for racking systems and as a result reduce handling time. This particular unit is designed for a Kilderkin cask (18 to 22 gallons) with a double outlet. A single outlet version is also available.

Each Flexible Ale Extractor kit includes:

• Flexible Ale Extractor Body (collar)
• Silicon Tube (Kilderkin) – Tube length is critical to performance.
  Please check you are ordering the correct size for your barrel.
• Float
• Single Hop Filter
• Non Return Valve
• 1 x 3/4 BSP x 1/2″ Tail
• 1 x 3/4 BSP Nut